TTI-TIA-525s-ST
TIA-525s with Si-PD DC - 35/125MHz
The TIA-525 optical receiver is a convenient, easy to use optical to electrical converter
Fiber Optics
TTI-TIA-X
O/E Converters
With the TIA series we offer optical-electrical converters for laboratory and field use.
TTI-TIA-4000
TIA-4000 with InGaAs-APD 30kHz - 7GHz
The TIA-4000 is comprised of a fiber coupled InGaAs APD detector combined with a variable reverse bias voltage network and fast transimpedance amplifier
TTI-TIA-2000
TIA-2000 with InGaAs-PD DC - 20GHz
The TIA-2000 Optical to Electrical Converter is a high speed photodetector module designed for direct optical-to-electrical conversion of RF-modulated optical signals and provides a typical bandwidth of DC-20 GHz
FLK-FI-7000
CertiFiber Pro Optical Loss Test Set
Fluke Networks' CertiFiber Pro speeds up every step in the fiber certification process.
FLK-FI-3000
FiberInspector Ultra MPO
The FI-3000 FiberInspector™ Ultra is the industry's most complete fiber inspection solution.
FLK-Versiv-Plattform
Fluke Networks GOLD Support
Gold Support is the comprehensive support and maintenance program for Fluke Networks products and accessories. Best-in-class support to reduce business downtime and ensure a higher return on investment.
FLK-DSX-PLA004S-PLA804S
DSX-602 CableAnalyzer
The high-quality permanent link adapters from Fluke Networks impress with their robustness and deliver standard-compliant measurement results
FLK-MS-POE
DSX-602 CableAnalyzer
Quickly determine if a problem is caused by a faulty or disconnected cable, insufficient power supply, or a powered device (PD).
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
