Pseudo Random Pattern Projector for your 3D Machine Vision application. Available in the standard or compact dimensions.
Machine Vision
1
Machine Vision
The high power system with thermoelectric temperature stabilization for even better signal-to-noise ratios and DB-connector for monitoring/modulation.
Coaxial illumination for extremely homogeneous illuminatio
Compact Camera Link fiber adapter for direct plugging into the camera and framegrabber. Only supports the Base Camera Link configuration.
DCM-SAR
Axial lighting systems (74 x 62)
Compact axial lighting for low-reflection surface inspection. Due to 90° deflection suitable for use in tight environments.
ACS-COAXPRESS-LP-Framegrabber
CoaXPress CXP-6 Low Profile Frame Grabber
The FIREBIRD COAXPRESS Frame Grabber is designed for ultimate performance providing the very fastest image acquisition without any CPU intervention using the latest FPGA families, DDR3 memory, and a fast Gen2 PCI Express interface
PHT-PHORCE-USB
Phrontier PHORCE - USB Fiber Adapter
The PHORCE family was designed to extend USB connections beyond the typical 3 meter reach limit of copper cables.
PHT-Active Kabel
Phrontier - USB 3.0 Active Cables
The PHORCE product family is designed to extend the SuperSpeed USB3.0 connections beyond the typical 3 meter reach of copper cables
The all-rounder. Connects splitter, switch and repeater in one device and has numerous functionalities.
DCM-SAX
Diffused axial lighting system
This lighting produces a very diffused light from the camera axis. Reflections and shadows are perfectly eliminated with this technology.
Compact Camera Link fiber adapter for direct plugging into the camera and framegrabber. Fully supports all Camera Link configurations: Base, Medium and Full.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
