Quick-Finder for laser safety goggles
DPSS Lasers Economy
The cw solid-state lasers of the CNI series are characterized by the availability of almost all commercially available wavelengths
Laser Safety Goggle 745-1115 nm polycarbonate
Laser safety goggles according to EN 207 and laser adjustment goggles according to EN 208 with polycarbonate filter and a daylight transmission of 42-45 %.
High Power Fiber Coupled Diode Lasers
Fiber-coupled diode laser with high performance and current and temperature control in a compact housing
Oxxius single-frequency lasers
single-frequency lasers for measurement and spectroscopy / DPSS laser and VBG stabilized Laser Diode modules
Oxxius Multi Wavelength Laser Combiner LnCc
The L6Cc and L4Cc laser combiner from Oxxius integrates 6 or 4 laser modules in a compact multi-wavelength laser system.
MLase Excimer Laser MLI series
The modern and compact MLI Excimer Laser series from MLase are UV light sources at 193 nm or 248 nm with high pulse energies up to 16 mJ and repetition rates up to 1,000 Hz !
Laser Safety Goggle 1025-1100 nm with glass filter
Laser Safety Goggles Finder
The laser goggles Finder allows you to filter out from our range of laser safety goggles and laser adjustment of your favorite glasses.
Laser Safety Goggle 800-1400/10600 nm with glass filter
Diode Lasers Economy
The CNI series cw diode lasers are available with nearly all commercial available wavelengths.
The highly compact diode and DPSS lasers from Oxxius impress with their wide availability in terms of wavelengths and power. Modulation and various fiber coupling options are available for all laser variants.
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
Laser Beam Profiler WinCamD-QD-1550
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.