LMT-ICS-9
Interlock control system ICS-9
The interlock control system ICS-9 reaches the highest possible performance level "PL e" when properly installed in accordance with EN ISO 13849-1.
The comprehensive Laser 2000 laser safety portfolio makes it possible to work safely with lasers. The company provides a wide range of laser safety seminars and products. Combined with in-depth counseling, this ensures that laser applications are safeguarded according to the applicable EU laser safety standards.
Laser accidents involving class 3R and higher lasers may cause serious injury and damage. For this reason, some very extensive precautions are required, which the operator of a laser system has to take into account. In addition, the number of laser applications is steadily increasing, which is why the associated safety is also becoming more and more important. Laser 2000 offers a comprehensive portfolio of necessary measures and solutions to meet these requirements.
LMT-ICS-9
The interlock control system ICS-9 reaches the highest possible performance level "PL e" when properly installed in accordance with EN ISO 13849-1.
L2K-LSF
The laser goggles Finder allows you to filter out from our range of laser safety goggles and laser adjustment of your favorite glasses.
LMT-LC-Orca
The laser protection curtains Orca are suitable for all lasers and wavelengths and thus provide the necessary level of protection in the field of variable laser protection curtains.
LMT-LC-Wolf
Laser safety curtain Wolf, the cost effective, certified curtains for low and medium powered lasers
LMT-LEDS-SJ
LMT-LBS-LIGHT
LMT-LEDS-ULT-470
The warning signs of the LMT-LEDS-ULT-470 series ensure a reliable status display of delimited laser-, X-ray- or other hazardous areas with large letters and warning symbols.
LMT-LEDS-2W
LED warning lights, its label varies depending on the status of the laser when used with an interlock system.
SLA-Fachseminar-EN-60825-1
Zweitägiges Fachseminar zur Klassifizierung von Laserprodukten folgend der Sicherheitsnorm EN 60825-1 sowie EN 50689.
Termin: Voraussichtlich Mitte/Ende 2025
LMT-LBS-FLATFOOT
DAT-WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.