Reference number: DAT-WinCamD-IRBB
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
Need more info?
Contact our expert.
Optical Test & Measurement Team
Phone: +49 8153 405-11
Description
The beam analysis camera WinCamD-IR-BB from DataRay is suitable for beam analysis for wavelengths in the infrared range (2-16 μm). This wide spectral range is made possible by the use of a microbolometer array. Other than usual with infrared cameras, this sensor can be dispensed with an active cooling. An integrated shutter also allows a dynamic correction of the noise and the baseline and an automatic non-uniformity correction (NUC).
| Spezification | Detail |
| Sensor | Vanadium oxide (VOx) microbolometer |
| Wavelength | Broadband MWIR/FIR: 2 to 16 µm |
| Pixel Count, H x V | 307 kilopixels, 640 x 480 |
| Image Area | 10,88 x 8,16 mm |
| Pixel Dimension | 17 x 17 µm |
| Min. Beam (10 Pixel) | ~170 µm |
| Shuttertype | Rolling |
| Max. Full Frame Rate | 30 Hz (7,5 for export) |
| Signal to RMS Noise | ≥1000:1 |
| Opt./Elec. dB | 30/60 |
| ADC | 14-bit |
| Measurable Sources | CW beams, pulsed sources (auto-trigger sync) |
| Manual Beam Attenuation | Provided 1" ND-1 and ND-2 reflective Germanium filters |
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.