AOI-analoge-Komponenten

Active Components
All electronic components of a transmission system, some of which can be programmed, form the active components of a said system. These include components such as individual diodes for transmission and reception, integrated transceivers, and optical amplifiers.
AOI-PD3000-xx-xx-H-x
Photo detcor for 1310 nm and 1550 nm
Photodetectors for use in optical networks.
AOI-digitale-Komponenten
Digital components from AOI
GGL-Transceiver
Gigalight-Transreciever
GigaLight has three product lines, the optical active transceiver, passive components and optical connectivity products.
GGL-400G-Transceiver
Gigalight - Ethernet Transceiver - 400G
Gigalight's 400G Transceiver-Module enables 400G Ethernet over short and medium range distances for Data-Center, Metro-Data Center Interconnect und Metro-Applications
GGL-200G-Transceiver
copy of Gigalight - Ethernet Transceiver - 400G
Gigalight's 400G Transceiver-Module enables 400G Ethernet over short and medium range distances for Data-Center, Metro-Data Center Interconnect und Metro-Applications
AOI-Transceiver
Optical transceiver
AOI is a leading manufacturer of optical semiconductors for demanding analog and digital transmission systems. The portfolio includes analog optical components, digital optical components and optical data transceivers.
GPC-FPS-001
Fiber Phase Shifter - FPS-001
GPC-FPS-002
Fiber Phase Shifter
GPC-FPS-003
Fiber Phase Shifter
GPC-FST-001
Fiber Stretcher
GPC-VDL-001
Manually Variable Optical Delay Line
General Photonics Manual Variable Optical Delay Line VDL-001 generates optical delays up to 600 ps (~18 cm).
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.