The PL-300 family of products extend PacketLight optical network solution capabilities by providing a wide range of passive optical modules.
Fiber & Telecom
1
Fiber & Telecom
IP66 wall splice box 24 x FO - The Laser 2000 BEP-24 wall splice box has been designed for a maximum of 24 FO plugs.
GigaLight has three product lines, the optical active transceiver, passive components and optical connectivity products.
Lead and lag fibers are used to adapt the meter to the target. The use of a launch fiber protects the adapters on the meter and evaluates the start or end events.
The FRC220 multi-chassis solution from CTC Union Technologies is a multi-service platform that provides an economical and reliable solution in high-density media converter module installation for telecom network operators, large enterprise, long haul transmission and telecom applications factory automation.
pre-assembled fiber optic cables and pigtails in different configurations
Splice protection press for crimp splice protection
The crimp splice protection serves to protect the splice against climatic and mechanical stresses. The protection is processed with the splice protection press.
SFF (2x5) transceivers are soldered to printed circuit boards (PCB) and are used in various fields such as telecommunications, data communication, system integration, Internet service providers, DSL, industrial communication or medical technology.
stripping 250 micron buffer coating from 125 micron optical fiber
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
