URM LH 16 SDF Wall-mounted Optical Distribution Box. The optical distribution box URM LH 16 SDF is designed for splicing, connectors connection and placing the splitter 1:8, 1:16. Box is ideal for FTTx applications.
Fiber Optics
ORMP 1U Draw-out-type ODF. The ORMP draw-out-type ODF is designed for the placement of 24 optical connectors indoors. The design of the patch panel enables to install it into a 19” rack.
ORSM 4 Module ODF. The optical distribution patch panel ORSM 4 and is designed for the placement of 72/144 optical connectors indoors in the central office. The distribution patch panel is designed for the installation into 19" or 21" data cabinet.
ORMPV 1U Hinged ODF. The ORMPV hinged module patch panel is designed for placing 48 optical connectors in internal environment. The design of the distributor enables installation on a 19” rack.
ORMPM 3U/144 Module ODF. Module rackmounted distributor ORMPM 3U/144 is designed for the placement 144 optical connectors into 12 vertical modules indoor. It is to install into 19“ rack.
ORSM 1 High Density Optical Distribution Cabinet With Compact Connector Modules. High density cabinet of a simple concept based on compact modules accommodating connectors, adapters and pigtails.
Data Centres - Data centres are one of the most important elements in communication infrastructure. Stored data must be available at any time and anywhere, unchanged and uncorrupted.
ORSM 2 High Density Optical Distribution Cabinet. High density cabinet of a simple concept based on compact modules accommodating connectors, adapters and pigtails. Modules are located in the column in the middle part of the rack. In the left part of the rack there is sufficient space for optical fibre cables termination.
ORS 1/300 Optical Distribution Cabinet. The ORS 1/300 optical distribution cabinet is designed for the placement of 1920 optical connectors indoors in a CENTRAL OFFICE. The distribution box allows to terminate and lead out any type of optical cables to main optical node.
ORS 2/300 Optical Distribution Cabinet. The optical distribution cabinet ORS 2/300 is designed for the placement of 960 optical connectors indoors in the CENTRAL OFFICE. The concept of the distribution box enables to terminate and lead out all types of optical cables to the point of main optical node.
SNM 288 VS SIS Optical Pillar Closure - Optical closure SNM 288 VS SIS is designed for the placement of up to 288 optical splices indoors and outdoors. Distributor could be installed outdoors or indoors in an open space in trench. Plastic corpus of pillar is staff ed by one SNM 288 VS distributor.
ORU 5 SDF SIS Concentrator Pillar Distribution Box. ORU 5 SDF SIS is designed as splitter concentrator pillar distributor with hinged rack for assembly up to 4 splice modules SE for terminating or connecting of optical cables in micro-ducts or HDPE protecting pipes. Its construction enables using indoors and outdoors as well. It is installed in an open space in trench.
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
