The laser safety ecabins are designed in a way, that for applications with class 4 lasers, the enviroment is properly protected and fullfills the class 1 conditions according to EN 60825-1 and OStrV.
Laser Safety cabins
1
Laser Safety cabins
Depending on the type of application, the best way to safeguard a class 4 laser environment might be to enclose the whole area on a large scale within a cabin. This kind of cabin solution is frequently used, particularly in the case of laser power ratings in the multi-kW range (as used in laser material processing). It is possible to enclose a laser application locally (for example, on an optical table) or within a room-sized cabin. Extraction systems, as well as associated vent holes, can also be implemented.
The laser safety enclosures are designed in a way, that for applications with class 4 lasers, the enviroment is properly protected and fullfills the class 1 conditions according to EN 60825-1 and OStrV.
Our experienced security expert checks your laser, laser devices or laser systems according to current standards for their safety and will issue a certificate upon successful acceptance or classification.
Laser safety cabin for the complete delimitation of a laser welding area.
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
