PRS-Weld-Helmet
Laser welding helmet MAXIMUS
Laser safety helmet for hand-held lasers and all welding applications with permanent laser protection and switchable automatic glare protection (ADF).
Laser Safety
NIR-Weld-View-7-ND1
Laser safety goggle for laser welding
Laser protection goggle for laser welding according to DIN EN 207 with additional flip filter.
BLZ-Fortbildung-Praktikum
Internship for laser safety officers
Practical training for laser safety officers to refresh and deepen specialist knowledge.
Language: German
Date: 01.10.2025, 08:30 - 17:00 Uhr
Location: Bayerisches Laserzentrum GmbH, Konrad-Zuse-Straße 2-6, 91052 Erlangen
Costs: 850,- EUR plus tax
PRS-Weld-Helmet-Light
Laser welding helmet MAXIMUS TROOPER
Laser safety helmet for hand-held lasers and all welding applications with permanent laser protection and switchable automatic glare protection (ADF).
LMT-Laser-Castle-Lite
Self-build Laser Safety Cabin for Laser Welding
The Laser Castle Lite is a cost-effective, modular laser safety enclosure that is easy to build and set up on site.
LMT-ALF-passive
Passive ALF Interlocked Laser Welding Helmet
Interlocked Laser Safety Helmet for Hand-held Laser Welding. Designed specifically to protect welders from stray laser radiation, the interlocked helmet design requires the helmet to be properly worn with the visor closed before firing the laser.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
