Laser Safety Windows
Laser safety windows are mainly used in the industrial sector and are composed of the same materials as laser safety goggles. The filters have been developed especially for the most common laser systems, so they cover a wide range of possible applications. From large-scale viewing windows for laser laboratories, to cabin windows in the laser enclosure, to tailor-made filters for special applications, Laser 2000 offers a standard-conforming and safe solution for every application.
The laser protection windows for UV and CO2 made of polycarbonate were specially developed for the most common laser systems.
The laser protection windows 765-1400 nm made of acrylic, with a daylight transmission of 23 % protect with a filter thickness of 3.2 mm.
The laser protection windows 190-315 nm & 500-532 nm made of acrylic, with a daylight transmission of 46 % protect with a filter thickness of 3.2 mm.
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
