MNS Wall Mounted Data Cabinets - The MNS wall mounted data cabinets are designed for the indoor installation of 19" technology onto a wall. Sliding supporting bars are used to install 19" technology.
Fiber Optics
ORU 1 SDF SIS Concentrator Pillar Distribution Box. ORU 1 SDF SIS is designed as splitter concentrator pillar distributor with hinged rack for assembly up to 4 splice modules SE for terminating or connecting of optical cables in micro-ducts or HDPE protecting pipes. Its construction enables using indoors and outdoors as well. It is installed in an open space in trench.
MSR Stand Frames -The stand frames are designed for indoor installation of 19" technology. The welded supporting frame is screwed to the base. For increased stability, the stand frames are equipped with a holding angle, which enables them to be fastened to the wall.
MSS Stand Data Cabinets - The MSS line stand data cabinets are designed for indoor installation of 19” or 21” technology (dimension of the base 800 × 600 mm and larger). A design of the self-supporting assembled frame enables an easy assembly of the data cabinet at the point of installation. The unique construction of these data cabinets also permits to reduce their weight substantially.
MSS 22U/55 Outdoor Data Cabinet - The case is designed for the installation of 19” outdoor technology. The design of the case enables opening of side covers which considerably simplify the installation of the technology. The case may be fitted with an air-conditioning unit upon customer’s request.
MSS AL/54 Outdoor Data Cabinet. The case is designed for the installation of 19" outdoor technology. The design of the case enables installation of side and rear doors which considerably simplify the installation of the technology. Box frame is composed of aluminium profiles. The case may be fi tted with an air-conditioning unit upon customer’s request.
SAP 3 Outdoor Data Cabinet - The SAP 3 data cabinet is designed for the installation of pasive and active 21" or 19" outdoor technology. The data cabinet is prepared for mounting air-conditioning unit attached on the door.
Multi-Quantum-Well (MQW) distributed feedback (DFB) laser for analog applications
Laser 2000 attaches great importance to the optimal care of your request. Experienced employees are available at Laser 2000. The calibration for fiber optic measurement technology, OTDR, LAN or protocol measurement technology is now offered by us across all manufacturers.
SNM 48 SIS Optical Pillar Closure - Optical pillar closure SNM 48 SIS is designed for the placement of 48 optical splices indoors and outdoors. Distributor is to install in an open space in trench. Plastic corpus of pillar is staffed by one SNM 48 distributor.
Fiberlaunch - the innovative launch fiber - Fast and easy OTDR measurement with our automatic FiberLaunch ™ Fiberlaunch launch fiber is an indispensable aid in OTDR measurements to ensure correct measurement of the entire fiber optic link from the first connector.
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
