FLK-CFP-100
CertiFiber Pro Optical Loss Test Set
Fluke Networks' CertiFiber Pro speeds up every step in the fiber certification process.
Network Technology
FLK-OFP-100
OptiFiber Pro LAN OTDR
Fluke Networks OptiFiber® Pro Series-OTDR makes novice and expert certification faster!
FLK-FI-7000
CertiFiber Pro Optical Loss Test Set
Fluke Networks' CertiFiber Pro speeds up every step in the fiber certification process.
FLK-FI-3000
FiberInspector Ultra MPO
The FI-3000 FiberInspector™ Ultra is the industry's most complete fiber inspection solution.
NQC-ACO-
Signal Analysis Systems
This page - analysis of signals of transmission technology - is under construction.
It provides an overview of systems that convert signals from current transmission networks of service providers or large ENterprise customers into readable Ethernet and direct them in a targeted manner to collectors to filter and analyze the data in real time and stores Metadata for later usage.
ACO-ANIC
FPGA based 1-100GE PCIe adapters
Accolade’s line of Advanced NIC FPGA based 1-100GE PCIe adapters and 1U platform enable Intelligent Host CPU Offload features such as 100% packet capture, flow classification, flow shunting, deduplication, packet filtering and more.
AOI-DFB-1550-T5-5-1.3-A-x-x-x
1,25 Gb/s 1550 nm DFB TO-Can Laser
Multiple Quantum Well (MQW) Distributed Feedback (DFB) Laser Design.
AOI-FP-1310-T5-5-2.5-x-A-x
2,5 Gb/s 1310 nm FP TO-Can Laser
Multi-Quantum Well (MQW) Fabry-Perot (FP) laser for low cost transmitters up to 2.5Gbps
AOI-FP-1310-C5-2-2.5-xx-A-x-x
2,5 Gb/s 1310 nm FP Coax Laser
1310 nm coaxial FP laser for 2.5 Gbps applications
AOI-DFB-1310-C5-2-A2-xx-x-x
CDMA 1310 nm DFB Coax Laser
Multi-Quantum Well (MQW) Distributed Feedback (DFB) Laser for analog application
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
