Splice protection press for crimp splice protection
The crimp splice protection serves to protect the splice against climatic and mechanical stresses. The protection is processed with the splice protection press.
IDE-STRIPPER-BLAU
Cable Stripper 32-56 mm
Strips most non-round shielded cable including Kapton®, and Kynar®, Teflon®, Tefzel and high-temperature insulated cable with 3 blades.
stripping 250 micron buffer coating from 125 micron optical fiber
Stripper for fiber protection tubes with diameter < 3.2mm
with 3 blades
FO 103 -T- 250 -J - “Tri-Hole” Fiber Optic Stripper
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.