FLK-CFP-100
CertiFiber Pro Optical Loss Test Set
Fluke Networks' CertiFiber Pro speeds up every step in the fiber certification process.
1
Enterprise and Data Center
FLK-DSX-5000
DSX-5000 CableAnalyzer
DSX2-5000 accelerates every step of the copper certification process
FLK-OFP-100
OptiFiber Pro LAN OTDR
Fluke Networks OptiFiber® Pro Series-OTDR makes novice and expert certification faster!
FLK-Versiv-Plattform
Fluke Networks GOLD Support
Gold Support is the comprehensive support and maintenance program for Fluke Networks products and accessories. Best-in-class support to reduce business downtime and ensure a higher return on investment.
FLK-LIQ-100
Network & Service Companion
Cable tests you can trust. Network tests you need. Measure network capacity up to 10 Gig via frequency-based measurements with the new LinkIQ from Fluke Networks.
FLK-DSX-PLA004S-PLA804S
DSX-602 CableAnalyzer
The high-quality permanent link adapters from Fluke Networks impress with their robustness and deliver standard-compliant measurement results
FLK-MS-POE
DSX-602 CableAnalyzer
Quickly determine if a problem is caused by a faulty or disconnected cable, insufficient power supply, or a powered device (PD).
FLK-DSX-602
DSX-602 CableAnalyzer
The Fluke Networks DSX-602 delivers the essentials of Cat 6A and Class EA copper certification with test times as fast as 10 seconds and an enhanced user interface.
FLK-DSX-8000
DSX-8000 CableAnalyzer
DSX2-8000 accelerates every step of the copper certification process
FLK-FTK1000-FTK2000
SimpliFiber Pro LSPM
SimpliFiber® Optical Power Meters and Fiber Optic Test Kits contain all the tools needed to test and troubleshoot fiber optic cable systems.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
