The laser protection windows 840-1250 nm made of acrylic, with a daylight transmission of 20 % protect with a filter thickness of approximately 3.3 mm.
Laser Safety
The laser protection windows 830-1295 nm made of acrylic, with a daylight transmission of 23 % protect with a filter thickness of 6.5 mm.
Laser adjustment goggles according to DIN EN 208 with polycarbonate filter and a daylight transmission of 31 %.
Laser safety goggles according to EN 207 with a polycarbonate filter and a daylight transmittance of 19 %.
Laser safety goggles according to DIN EN 207 with glass filter and a daylight transmission of 57 %.
Laser safety goggles according to DIN EN 207 with polycarbonate filter and a daylight transmission of 90 %.
Laser safety goggles with polycarbonate filter and a daylight transmittance of 92 %.
Laser safety goggles according to DIN EN 207 with polycarbonate filter and a daylight transmission of 22 %.
Accredited training for becoming a laser safety officer according to the german optical beam protection ordinance.
Duration: Both days 08.30 am - 2.00 pm
Accredited training (in Englisch) for becoming a laser safety officer according to the german optical beam protection ordinance.
Duration: Both days 08.30 am - 2.00 pm
The focus of this seminar lies on the refreshment of the basic knowledge about laser safety as well as pratical applications.
Duration: : 8:30 a.m. - 4 p.m.
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
