BWT-BCH100A/BCH103A
Cuvette Holder
2 & 3 Port Cuvette Holders from B&W Tek for standard cuvettes (12,5 x 12,5 mm)
Optical Test & Measurement
BWT-FRPH
Fiber Reflectance Probe Holder
Fiber Reflectance probe Holder from B&'W Tek for manual positioning of the fiber to sample distance
BWT-BIP2.0
Fiber Optic Collimating Lenses
Compact, fiber-coupled Ulbricht Kugle with integrated, long-life 20 W halogen lamp Light source from B&W Tek for the spectral range from 350 nm to > 2600nm.
BWT-BIS1.5A
Integrating Sphere
Compact fiber-coupled integrating sphere from B&W Tek for the range of 250 nm - 2500 nm.
BWT-BAC102
Fiber Coupled Raman Trigger Probe
Raman Trigger Probe BAC102 from B&W Tek can be used for a variety of applications due to the different versions. Flexible measurements can be performed with a trigger button on the probe head.
BWT-BAC101
Industrial Raman Probe
Raman immersion probe from B&W Tek for in-situ analysis even in demanding industrial environments.
BWT-BAC151
Raman Microscope
The compact and flexible Raman microscope from B&W Tek offers the highest requirements for applications in the field of Raman spectroscopy.
BWT-BAC150B
Raman Probe Holder
With the Raman Probe holder from B&W Tek, the distance and position to the sample can be precisely adjusted by adjusting the XYZ axis.
BWT-RIS100
Raman Immersion Shaft
The immersion shaft can be used as replacement shaft for the BWT-BAC100 and BWT-BAC102 Raman probe
BWT-BCR100A
Raman Cuvette Holder
Raman cuvette holder from B&W Tek for highest signal yield due to integrated mirror.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
