FJW-84499C
IR-Vision Device 350 - 1350 nm C-Mount
Display device for adjustment of infrared lasers that are not in the visible range.
Infrared vision devices and sensor cards
1
Infrared vision devices and sensor cards
UV and IR sensor cards (also known as transducer cards) are indispensable tools in any optical laboratory. They are ideal for the adjustment and visualization of invisible laser radiation. Even low laser powers of a few μW can be displayed with the aid of the cards. High-temperature cards are available for higher laser power levels; their sensitive surfaces consist of temperature-resistant ceramics. Special types of sensor cards for Nd:YAG or CO2 lasers as well as printed cards and adhesive films complement the product range.
FJW-84499C-5
IR-Vision Device 350 - 1550 nm C-Mount
Display device for adjustment of infrared lasers that are not in the visible range.
IRV-VIR-2
IR-Viewers, 2x
High performance image conversion infrared (IR) viewers based on high-grade image converter are designed to observe indirect radiation of infrared laser, light emitting diodes (LED), dye and other IR-sources in 350 – 2000 nm spectral range.
IRV-VIR-1
IR-Viewers, 1x
High performance image conversion infrared (IR) viewers based on high-grade image converter are designed to observe indirect radiation of infrared laser, light emitting diodes (LED), dye and other IR-sources in 350 – 2000 nm spectral range.
QTX-Q-AP
IR-Sensor cards with crosshairs
UV and especially IR sensor cards are indispensable tools in every single laboratory. They are ideal for adjusting and visualizing invisible laser radiation.
QTX-Q-Stick
IR-Sensor-Rods
UV and especially IR sensor cards are indispensable tools in every single laboratory. They are ideal for adjusting and visualizing invisible laser radiation.
QTX-U
UV-Sensor cards
UV and especially IR sensor cards are indispensable tools in every single laboratory. They are ideal for adjusting and visualizing invisible laser radiation.
QTX-Q
IR-Sensor cards
UV and especially IR sensor cards are indispensable tools in every single laboratory. They are ideal for adjusting and visualizing invisible laser radiation.
QTX-ADQ-80
Self-adhesive foils 8'' x 10''
UV and especially IR sensor cards are indispensable tools in every single laboratory. They are ideal for adjusting and visualizing invisible laser radiation.
QTX-ADQ-44
Self-adhesive foils 4'' x 4''
UV and especially IR sensor cards are indispensable tools in every single laboratory. They are ideal for adjusting and visualizing invisible laser radiation.
QTX-ADQ-22
Self-adhesive foils 2'' x 2''
UV and especially IR sensor cards are indispensable tools in every single laboratory. They are ideal for adjusting and visualizing invisible laser radiation.
QTX-ADQ-3/4
Self-adhesive foils 0.75'' x 0.75''
UV and especially IR sensor cards are indispensable tools in every single laboratory. They are ideal for adjusting and visualizing invisible laser radiation.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
