GEE-GEVXD
Power Bar Light GEVXD
LED lighting solution designed for vision systems with linear or matrix cameras from 1 to 4 simultaneous lighting channels in one product. Available as Diffused, fixed or strobe light illuminator with logic start.
Machine Vision
OTG-IM
Imaging Module
Opto's compact imaging modules achieve sub-micron resolutions and are each optimized for specific applications. They do not require calibration and come already with integrated illumination (coaxial & ring light) and comprehensive software at a maximum field of view of 307x230 mm².
Pseudo Random Pattern Projector for your 3D Machine Vision application. Available in the standard or compact dimensions.
The high power system with thermoelectric temperature stabilization for even better signal-to-noise ratios and DB-connector for monitoring/modulation.
Compact Camera Link fiber adapter for direct plugging into the camera and framegrabber. Only supports the Base Camera Link configuration.
PHT-PHORCE-USB
Phrontier PHORCE - USB Fiber Adapter
The PHORCE family was designed to extend USB connections beyond the typical 3 meter reach limit of copper cables.
PHT-Active Kabel
Phrontier - USB 3.0 Active Cables
The PHORCE product family is designed to extend the SuperSpeed USB3.0 connections beyond the typical 3 meter reach of copper cables
The all-rounder. Connects splitter, switch and repeater in one device and has numerous functionalities.
Compact Camera Link fiber adapter for direct plugging into the camera and framegrabber. Fully supports all Camera Link configurations: Base, Medium and Full.
Compact Camera Link Repeater to double the link distance. Fully supports all Camera Link configurations: Base, Medium and Full.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
