OTG-IM
Opto's compact imaging modules achieve sub-micron resolutions and are each optimized for specific applications. They do not require calibration and come already with integrated illumination (coaxial & ring light) and comprehensive software at a maximum field of view of 307x230 mm².
100GigE area scan industrial camera capable of ultra-high frame rates up to 3500 fps, offering resolutions from 2.5 to 152 megapixels, based on Sony and GPixel image sensors.
50 GigE area scan industrial camera capable of ultra-high frame rates up to 1700 fps, offering resolutions from 2.5 to 152 megapixels, based on GPixel image sensors.
25 GigE area scan industrial camera capable of high frame rates up to 1594 fps, offering resolutions from 0.5 to 127 megapixels, based on AMS, GPixel and Sony image sensors.
10 GigE area scan industrial camera capable of high frame rates up to 1586 fps, offering resolutions from 0.5 to 50 megapixels, based on AMS and Sony image sensors.
Smallest 10 GigE area scan industrial camera capable of high frame rates up to 1586 fps, offering resolutions from 0.5 to 25 megapixels, based on Sony image sensors.
Ultra-fast industrial line-scan cameras for up to 1000 kHz linerate and 100 GigE interface, offering resolutions from 8k to 16k per line, monochrome, single line or trilinear, based on Gpixel image sensors.
Fast industrial line-scan cameras for up to 300 kHz linerate and 25 GigE interface, offering resolutions from 8k to 16k per line, monochrome, single line or trilinear, based on Gpixel image sensors.
Fast industrial line-scan cameras for up to 172 kHz linerate and 10 GigE interface, offering resolutions from 8k to 16k per line, monochrome, single line or trilinear, based on Gpixel image sensors.
Fast industrial line-scan cameras for up to 137 kHz linerate and 10 GigE interface, offering resolution of 8k per line, monochrome, single line or trilinear, based on Gpixel image sensors.
High resolution area-scan camera for industrial SWIR applications up to 1700 nm, resolution 0.08 to 5MP, InGaAs sensor
Prism based area-scan camera with 2 sensors for industrial applications for VIS to NIR, 1.5 MP resolution, CMOS technology.
DAT-WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
