Laser protection glasses according to DIN EN 208 with polycarbonate filter and a daylight transmission of 10 %.
Laser Safety
LMT-LWL-2W
Illuminated Laser Warning Sign (2-Way)
The LED warning lights to indicate status of security restricted areas or spaces are operated at low voltage. With its compact size, it can be well attached to the entrance area at eye level.
UNV-G2012-559G
Laser Safety Goggle 9000-11500 nm, Glass Filter - DI LB5
Laser safety goggles according to DIN EN 207 with glass filter and a daylight transmission of 92 %.
NIR-YAD-xxx
Laser Eyewear, 720-1070 nm
Laser safety goggles according to DIN EN 207 with polycarbonate filter and a daylight transmission of 11 %.
UNV-P1031-xxx
Laser adjustment goggle, 589-699 nm up to 100 mW
Laser adjustment goggles according to DIN EN 208 with polycarbonate filter and a daylight transmission of 15 %.
UNV-P1008-xxx
Laser Safety Goggle, 735-870 nm
Laser safety goggles according to DIN EN 207 with polycarbonate filter and a daylight transmission of 19%.
NIR-AXX-xxx
Laser Eyewear, 720-830 nm
Laser safety goggles according to DIN EN 207 with polycarbonate filter and a daylight transmission of 33 %.
UNV-G2006-616
Patients Goggle 190-580 nm
Laser safety goggles for patients according to DIN EN 207 with glass filter and a daylight transmission of 14%.
LMT-ERB
Laser Roller-Blinds
Laser blinds and laser protective visors are designed as passive protection systems to prevent the leakage of laser beams.
Laser safety goggles according to DIN EN 207 with glass filter and a daylight transmission of 27 %.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.





