The number of applications in which lasers and light sources are used is growing very rapidly. Therefore, the development of new laser sources and the optimization of already established lasers is one of the main tasks in the field of photonics.
Today, lasers play an important role in numerous applications, ranging from measurement and biotechnology to material processing. Accordingly, lasers with different wavelengths, power levels, sizes, shapes, etc. are needed. Laser 2000 offers a wide range of different laser light sources for industrial and scientific applications.
LED and broadband light sources are applied in molecular analysis, cell research, industrial imaging, forensics, color measurement and patient care.
A revolution in material processing: setting new benchmarks in high power blue laser technology. This innovation in precision engineering has led to the creation of BL-Series variants that are optimized to deliver exception performance, versatility and unmatched beam quality for blue laser sources. The application range is wide, but especially for non-ferrous metals are in focus (copper laser welding, gold laser welding).
Fiber-coupled diode laser with high performance and current and temperature control in a compact housing
The FIR-/THz lasers are optically pumped lasers used in applications where coherent radiation in the range of 40 μm to 1.22 mm (0.25 –7.5 THz) is required.
The modern and compact MLI Excimer Laser series from MLase are UV light sources at 193 nm or 248 nm with high pulse energies up to 16 mJ and repetition rates up to 1,000 Hz !
The PL series of continuous wave, grating tuned, infrared gas lasers sets the standard for high power, stable sources for a wide variety of applications in molecular spectroscopy.
JDSU direct-diode laser products provide up to 180 watts output at 940 nm with 600 µm fiber delivery
The JDSU Q Series lasers are Q-switched diode-pumped UV and green lasers which are used for high-pulse-energy processing of materials such as ceramics, high-repetition-rate processing of materials such as sapphire or silicon.
The FOL-GS-xxx G-Stack laser diode bars have 100 to 250 W power.
The highest power system with thermoelectric temperature stabilization for even better signal-to-noise ratios and DB-connector for monitoring/modulation.
The Q-Switched Series breakthrough technology enables optimum performance with the lowest power consumption available.
The CNI series cw diode lasers are available with nearly all commercial available wavelengths.
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
