PSY-Deep UV-Laser
Deep UV-Laser, 224 nm or 248 nm
The Photon Systems Deep UV laser product family is a revolutionary new family of deep ultraviolet laser products.
Laser & Light Sources
Laser & Light Sources
The number of applications in which lasers and light sources are used is growing very rapidly. Therefore, the development of new laser sources and the optimization of already established lasers is one of the main tasks in the field of photonics.
Today, lasers play an important role in numerous applications, ranging from measurement and biotechnology to material processing. Accordingly, lasers with different wavelengths, power levels, sizes, shapes, etc. are needed. Laser 2000 offers a wide range of different laser light sources for industrial and scientific applications.
LED and broadband light sources are applied in molecular analysis, cell research, industrial imaging, forensics, color measurement and patient care.
The high power system with thermoelectric temperature stabilization for even better signal-to-noise ratios and DB-connector for monitoring/modulation.
CNI-HighPower-Fiber-Diode
High Power Fiber Coupled Diode Lasers
Fiber-coupled diode laser with high performance and current and temperature control in a compact housing
EDI-MTL-5
Mini TEA pulsed CO2 Laser
The MTL-5 is a compact, user-friendly, bench-top, Transverse Excited Atmospheric (TEA) Pressure pulsed CO2 Laser.
EDI-FIR
FIR-/THz-Laser
The FIR-/THz lasers are optically pumped lasers used in applications where coherent radiation in the range of 40 μm to 1.22 mm (0.25 –7.5 THz) is required.
MLA-MLI
MLase Excimer Laser MLI series
The modern and compact MLI Excimer Laser series from MLase are UV light sources at 193 nm or 248 nm with high pulse energies up to 16 mJ and repetition rates up to 1,000 Hz !
JDP-IDL-series
JDSU Direct-Diode laser
JDSU direct-diode laser products provide up to 180 watts output at 940 nm with 600 µm fiber delivery
JDP-DPSS-Pulsed-Q-Series
JDSU Solid-State Pulsed laser
The JDSU Q Series lasers are Q-switched diode-pumped UV and green lasers which are used for high-pulse-energy processing of materials such as ceramics, high-repetition-rate processing of materials such as sapphire or silicon.
FOL-GS-xxx
G-Stack Laser Diode Bar Passive Cooled
The FOL-GS-xxx G-Stack laser diode bars have 100 to 250 W power.
The highest power system with thermoelectric temperature stabilization for even better signal-to-noise ratios and DB-connector for monitoring/modulation.
CRL-DPSS-UV-IR-pulsed
Pulsed DPSS Lasers
The Q-Switched Series breakthrough technology enables optimum performance with the lowest power consumption available.
CNI-Diode-Laser
Diode Lasers Economy
The CNI series cw diode lasers are available with nearly all commercial available wavelengths.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
