OSE-SCF
Longpass Filters
Longpass filter that cut the short wavelength and let the long wavelength transmit.
1
Optical Components
Below you will find a selection of filters, lenses, mirrors and objectives. These optical components are essential parts of any fluorescence microscope. Each application requires the use of precisely matched colour filters for excitation and emission light. Dichroic mirrors are needed to separate different wavelengths in the same beam path. Optical mirrors are needed to direct and precisely adjust the beam path. For many microscope applications, lenses or objectives are used to focus or capture light. If you have special requirements regarding quality, delivery time or application, please contact our biophotonics team.
OSE-VND
Variable Relfective ND Filters
The OSE-VND are reflcetive ND filters. The reflectivit and the transmittance vary by rotation.
OSE-SHPF
Short Pass Filters, OSE-SHPF
Filters are designed to divide sharply the wavelength color by transmitting the short wavelength and cutting off the long wavelength.
OSE-LOPF
Longpass Filters, OSE-LOPF
Filters are designed to divide sharply the wavelength color by transmitting the short wavelength and cutting off the long wavelength.
OSE-SDM
Sharp Cut Dichroic Mirrors
Divides sharply the color of wavelength by reflecting the short wavelength and transmitting the long wavelength.
OSE-OPBA
High Parallism Aluminium Mirror, BK7
This is a vapor-deposited aluminum flat mirror in which the substrate has been polished to a high degree of accuracy and is designed for high reflectivity at any angle of incidence.
OSE-TFAG
Silver Flat Mirror
Silver (Ag) coated mirrors have a high reflectance over a wide range from visible to infrared wavelengths.
OSE-SLB-P
Plano Convex Lens, Uncoated, BK7
These simple plano-convex lenses have a flat surface on one side and a spherical surface on the other side. They are also very close to the shape that minimizes spherical aberration for infinite conjugate applications
![Plano Convex Lens, AR [nm]: 750 - 1550, BK7](https://www.laser2000.com/93676-home_default/plano-convex-lens-ar-nm-750-1550-bk7.jpg)
OSE-SLB-PIR2
Plano Convex Lens, AR [nm]: 750 - 1550, BK7
These simple plano-convex lenses have a flat surface on one side and a spherical surface on the other side. They are also very close to the shape that minimizes spherical aberration for infinite conjugate applications
These reflective microscope objectives are optimized for chromatic aberration over a bandwidth of 350 nm to 7 µm.
CHR-BP
Bandpass filters
Precise bandpass filters for use in microscopy, Raman spectroscopy, imaging and much more.
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
