The GlacierX is a TE cooled CCD spectrometer. This spectrometer is ideal for most UV-NIR applications with spectral configurations from 200 - 1050 nm.
Detectors
1
Detectors
The StellarNet BLUE-Wave miniature spectrometer is a fiber optically coupled instrument with a wide selection of models for measurements in 200 - 1150 nm wavelength ranges.
StellarNet's concave grating spectrometer delivers high performance for spectroscopy applications in the UV-VIS wavelength ranges covering 190 - 850 nm, or optionally 280 - 900 nm.
The Exemplar® HT is a high-performance Raman spectrometer with very high throughput. The back-thinned CCD detector allows highest efficiency with low noise and high dynamic range.
The Acuros eSWIR HD series from SWIR Vision Systems deliver highest-resolution images in the range from 400 to 2100 nm.
The high-resolution Xenics Wildcat+ 1280 series with its 1.33 megapixel VIS-SWIR InGaAs sensor offers best image quality in an industry-proven design.
Opto's compact imaging modules achieve sub-micron resolutions and are each optimized for specific applications. They do not require calibration and come already with integrated illumination (coaxial & ring light) and comprehensive software at a maximum field of view of 307x230 mm².
Opto's compact imaging modules achieve sub-micron resolutions and are each optimized for specific applications. They require no calibration and are ultra compact with a width of only 40 mm. It has GigE as well as USB 3.1 connections in 5x, 10x, 20x - in monochrome or color. It is a high quality inverted machine vision microscope.
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
