The laser goggles Finder allows you to filter out from our range of laser safety goggles and laser adjustment of your favorite glasses.
Laser Safety Goggles
Filters
Test standard
Test standard
Filter Material
- Glass
Filter Material
1
Laser Safety Goggles
Operating with open laser systems of class 3R and above can result in serious damage to the human eye. Therefore, it is important to protect the eyes accordingly by means of suitable laser safety goggles. A norm-certified laser safety goggle fulfills the legal requirements and safeguards the eyes from dangerous laser radiation. The goggle frames can be fitted with a variety of laser safety filters made of polycarbonate or glass. Wavelengths from the deep UV to the far infrared range and laser modes from continuous (cw) to the ultrashort pulse range (fs pulses) are covered. This means that the entire laser safety goggles are certified according to DIN EN 207 (full protection) or DIN EN 208 (protection during alignment work).
Laser safety goggles according to EN 207 with glass filter and a daylight transmittance of 65 %.
Laser safety goggles according to EN 207 and glass with interference filters and a daylight transmittance of 15%.
Laser safety goggles for patients according to DIN EN 207 with glass filter and a daylight transmission of 62 %.
Laser safety goggles according to DIN EN 207 with glass filter and a daylight transmission of 92 %.
Laser safety goggles for patients according to DIN EN 207 with glass filter and a daylight transmission of 14%.
Laser safety goggles according to DIN EN 207 with glass filter and a daylight transmission of 27 %.
DIN standard certified laser safety goggles with ergonomic brackets for all laser wavelengths commonly used in telecom and a daylight transmission of 57 %.
Laser safety glasses for Nd: YAG laser with interference filter glass and a daylight transmission of 70 %
Laser safety goggles for patients according to DIN EN 207 with glass filter and a daylight transmission of 27 %.
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
