UNV-G2001-616
Patients Goggle 645-1525/2800-3300/10600 nm
Laser safety goggles for patients according to DIN EN 207 with glass filter and a daylight transmission of 27 %.
Laser Safety Goggles
Filters
Test standard
Test standard
Filter Material
- Glass - Stainless steel
Filter Material
1
Laser safety goggles according to DIN EN 207 with glass filter and a daylight transmission of 30 %.
UNV-G2004-xxx
Laser safety goggle, 825-3000/10600 nm
DIN standard certified laser safety goggles with ergonomic brackets for all laser wavelengths commonly used in telecom.
UNV-G2006-xxx
Laser Safety Goggle 190-535 nm, Glass Filter
Laser safety goggles according to DIN EN 207 with glass filter and a daylight transmission of 7%.
UNV-G3005-559G
Laser Safety Goggle 750-1120 nm, Glass Filter
Laser safety goggles according to DIN EN 207 with glass filter and a daylight transmission of 40 %.
UNV-G2014-559G
Laser Safety Goggle 780-3300 & 9000-11000 nm, Glass Filter
Laser safety goggles according to DIN EN 207 with glass filter and a daylight transmission of 57 %.
Laser safety goggles according to DIN EN 207 with polycarbonate filter and a daylight transmission of 75 %.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
