PSL-HeNe
JDSU Helium-Neon gas laser
JDSU helium-neon lasers with the wavelength 632.8nm are available in the power range from 0.5 mW to 22.5 mW.
Laser & Light Sources
Laser & Light Sources
The number of applications in which lasers and light sources are used is growing very rapidly. Therefore, the development of new laser sources and the optimization of already established lasers is one of the main tasks in the field of photonics.
Today, lasers play an important role in numerous applications, ranging from measurement and biotechnology to material processing. Accordingly, lasers with different wavelengths, power levels, sizes, shapes, etc. are needed. Laser 2000 offers a wide range of different laser light sources for industrial and scientific applications.
LED and broadband light sources are applied in molecular analysis, cell research, industrial imaging, forensics, color measurement and patient care.
The high power system with thermoelectric temperature stabilization for even better signal-to-noise ratios and DB-connector for monitoring/modulation.
CNI-HighPower-Fiber-Diode
High Power Fiber Coupled Diode Lasers
Fiber-coupled diode laser with high performance and current and temperature control in a compact housing
EDI-MTL-5
Mini TEA pulsed CO2 Laser
The MTL-5 is a compact, user-friendly, bench-top, Transverse Excited Atmospheric (TEA) Pressure pulsed CO2 Laser.
EDI-FIR
FIR-/THz-Laser
The FIR-/THz lasers are optically pumped lasers used in applications where coherent radiation in the range of 40 μm to 1.22 mm (0.25 –7.5 THz) is required.
MLA-MLI
MLase Excimer Laser MLI series
The modern and compact MLI Excimer Laser series from MLase are UV light sources at 193 nm or 248 nm with high pulse energies up to 16 mJ and repetition rates up to 1,000 Hz !
JDP-Argon
JDSU Argon-Ion Lasers
JDSU’s air-cooled argon lasers are designed for complex, high-resolution applications such as flow cytometry, DNA sequencing, graphic arts, and semiconductor inspection
JDP-DPSS-CW
JDSU Solid-State CW lasers
These DPSS lasers have very low noise and excellent beam quality. They have been designed for easy integration.
JDP-IDL-series
JDSU Direct-Diode laser
JDSU direct-diode laser products provide up to 180 watts output at 940 nm with 600 µm fiber delivery
JDP-DPSS-Pulsed-Q-Series
JDSU Solid-State Pulsed laser
The JDSU Q Series lasers are Q-switched diode-pumped UV and green lasers which are used for high-pulse-energy processing of materials such as ceramics, high-repetition-rate processing of materials such as sapphire or silicon.
PHO-DBR-xxx
Single-Frequency Laser Diode
Single Frequency Laser Diodes from Photodigm, Wavelengths, and Packages 730 nm to 1090 nm Laser Diode.
JDP-NPRO-series
JDSU NPRO Single Frequency Laser
JDSU solid-state laser can be used for fiber optic sensors, coherent communications, remote antenna connections, optical heterodyne techniques, lidar, sonar and passive oscillators.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
