SCT-441
SCT-441 Lock-In Amplifier
A dual phase lock-in amplifier with manual setting, using jumpers, of input mode, sensitivity, low pass filter time constant and reference signal course phase control.
Optics & Optomechanics
SCT-300P
SCT-300P Blade Protector
Consists of a blade protector suitable for mounting on to a SCT-300H chopping head, six blanking plates, six 12 mm aperture plates and mounting screws.
SCT-340P
SCT-340P Blade Protector
Consists of a blade protector suitable for mounting on to a SCT-340H chopping head, six blanking plates, six 44 mm aperture plates and mounting screws.
SCT-300HF
SCT-300HF High Frequency Accessory
A high frequency accessory enables a large beam diameter to be modulated at a high frequency
SCT-300HF445
SCT-300HF445 High Frequency Accessory
A high frequency accessory enables a large beam diameter to be modulated at a high frequency
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
