OSE-NPCH
Non-polarizing Cube Half Mirrors
Half mirrors have a uniform 1:1 ratio of reflection and transmission for both linearly polarized light and normal light source.
Filters
!shop!_Type
!shop!_Material
!shop!_Material
1
Beam Splitters
OSE-HBCH
Hybrid Cube Half Mirrors
Low polarization cube half mirrors can be used for broadband visible and infrared light. The hybrid coating is a special combination of metallic and dielectric multilayers resulting in a low polarizing and broadband coating.
OSE-CSCH
Chromium Cube Half Mirrors
Chromium cube half mirrors consist of two rectangular prisms. One of them is coated with chromium on the hypotenuse surface.
OSE-CSMH
Dielectric Cube Half Mirrors
Dielectric cube half mirrors consist of two right-angled prisms. One of them is coated with a dielectric multilayer partial reflection layer on the hypotenuse surface.
These half mirrors have 4 types of ultra-wideband optics suitable for UV to IR applications.
OSE-PSMH-LL
Laser Line Plate Half Mirrors
Laser line plate mirrors are plate beamsplitters optically coated on the front side of optical parallels or wedge-shaped substrates with a dielectric multilayer coating.
OSE-PSMH
Broadband Dielectric Half Mirrors
These half mirrors have 3 types of ultra-wideband optics for ranges from visibile to NIR, which are used for optical communication applications.
OSE-MPSMH
Thin Plate Beamsplitter
These thin beam splitters can be inserted into an optical light path without beam shift or chromatic dispersion for any light transmission application.
OSE-PSCH
Chromium Plate Half Mirrors
Chrome plate half mirrors are plate beamsplitters coated with chrome on the front side of optical parallels or wedge-shaped substrates.
OSE-CSM33
Dielectric Cube Beamsplitters, 1:2
Cube beamsplitter with dielectric multilayer coating on the hypotenuse face of a 45° angle prism. Reflectance : Transmittance: 1:2
OSE-CSM25
Dielectric Cube Beamsplitters, 1:3
Cube beamsplitter with dielectric multilayer coating on the hypotenuse face of a 45° right-angle prism. Reflectance : Transmittance: 1:3
OSE-PSM33
Dielectric Plate Beamsplitters, 1:2
Plate beam splitters are dielectric multilayer coatings on a parallel plate or wedge substrate. Reflectance : Transmittance: 1:2
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
