The modern and compact MLI Excimer Laser series from MLase are UV light sources at 193 nm or 248 nm with high pulse energies up to 16 mJ and repetition rates up to 1,000 Hz !
Lasers
Filters
Wavelength (nm)
Wavelength (nm)
Operating Mode
- CW - Pulsed
Operating Mode
1
JDSU’s air-cooled argon lasers are designed for complex, high-resolution applications such as flow cytometry, DNA sequencing, graphic arts, and semiconductor inspection
The PL series of continuous wave, grating tuned, infrared gas lasers sets the standard for high power, stable sources for a wide variety of applications in molecular spectroscopy.
These DPSS lasers have very low noise and excellent beam quality. They have been designed for easy integration.
JDSU direct-diode laser products provide up to 180 watts output at 940 nm with 600 µm fiber delivery
The JDSU Q Series lasers are Q-switched diode-pumped UV and green lasers which are used for high-pulse-energy processing of materials such as ceramics, high-repetition-rate processing of materials such as sapphire or silicon.
Single Frequency Laser Diodes from Photodigm, Wavelengths, and Packages 730 nm to 1090 nm Laser Diode.
JDSU solid-state laser can be used for fiber optic sensors, coherent communications, remote antenna connections, optical heterodyne techniques, lidar, sonar and passive oscillators.
The FOL-GS-xxx G-Stack laser diode bars have 100 to 250 W power.
The highest power system with thermoelectric temperature stabilization for even better signal-to-noise ratios and DB-connector for monitoring/modulation.
The Q-Switched Series breakthrough technology enables optimum performance with the lowest power consumption available.
The CNI series cw diode lasers are available with nearly all commercial available wavelengths.
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
