PSL-HeNe
JDSU Helium-Neon gas laser
JDSU helium-neon lasers with the wavelength 632.8nm are available in the power range from 0.5 mW to 22.5 mW.
The illumination spectrum of lasers is usually narrower band than conventional light sources resulting in a very coherent light beam. Laser 2000 offers an extensive selection of lasers and other specialized coherent light sources.
Lasers are selected based on wavelength, power, pulsed or cw operation, and other criteria.
PSL-HeNe
JDSU helium-neon lasers with the wavelength 632.8nm are available in the power range from 0.5 mW to 22.5 mW.
CNI-DPSS-CW-Laser
The cw solid-state lasers of the CNI series are characterized by the availability of almost all commercially available wavelengths
CNI-HighPower-Fiber-Diode
Fiber-coupled diode laser with high performance and current and temperature control in a compact housing
EDI-FIR
The FIR-/THz lasers are optically pumped lasers used in applications where coherent radiation in the range of 40 μm to 1.22 mm (0.25 –7.5 THz) is required.
JDP-Argon
JDSU’s air-cooled argon lasers are designed for complex, high-resolution applications such as flow cytometry, DNA sequencing, graphic arts, and semiconductor inspection
JDP-DPSS-CW
These DPSS lasers have very low noise and excellent beam quality. They have been designed for easy integration.
JDP-IDL-series
JDSU direct-diode laser products provide up to 180 watts output at 940 nm with 600 µm fiber delivery
PHO-DBR-xxx
Single Frequency Laser Diodes from Photodigm, Wavelengths, and Packages 730 nm to 1090 nm Laser Diode.
JDP-NPRO-series
JDSU solid-state laser can be used for fiber optic sensors, coherent communications, remote antenna connections, optical heterodyne techniques, lidar, sonar and passive oscillators.
FOL-GS-xxx
The FOL-GS-xxx G-Stack laser diode bars have 100 to 250 W power.
The highest power system with thermoelectric temperature stabilization for even better signal-to-noise ratios and DB-connector for monitoring/modulation.
DAT-WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.