LMT-LC-Orca
Laser Safety Curtain Orca
The laser protection curtains Orca are suitable for all lasers and wavelengths and thus provide the necessary level of protection in the field of variable laser protection curtains.
Separation of Laser Areas
Filters
Type
- Laser safety blind - Laser safety curtain
1
Separation of Laser Areas
According to the German Ordinance on the Protection of Employees Against Hazards caused by Artificial Optical Radiation (OStrV), laser areas must be designed in such a way that the class 1 emission limit of the laser is not exceeded. This condition can, for example, be met by means of large-scale mechanical shielding made of tested and certified material. For this purpose, Laser 2000 offers laser safety curtains, manual or motorized roller blinds, fixed or roller-mounted screens, and screens for laboratory tables.
LMT-LC-Wolf
Laser Safety Curtain Wolf
Laser safety curtain Wolf, the cost effective, certified curtains for low and medium powered lasers
LMT-Weld-Curtain
Laser Safety Curtain for Laser Welding
Laser safety curtain for delimiting laser welding areas.
LMT-Weld-Curtain-Light
Laser Safety Curtain Light for Laser Welding
The laser safety curtain Weld-Curtain-Light is suitable as cost-effective protection against weak scattered laser radiation from a laser welding process.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
