Air-cooled laser safety shutter for up to 20 W of optical power. Can be mounted horizontal or vertical.
Laser Safety
Air-cooled laser safety shutter for up to 20 W of optical power. Can be mounted horizontal or vertical. Safety standard SIL3.
Laser protection glasses according to DIN EN 207 with polycarbonate filter and a daylight transmission of 20 %.
Laser protection glasses according to DIN EN 207 with polycarbonate filter and a daylight transmission of 15 %.
Laser safety goggles according to DIN EN 207 with polycarbonate filter and a daylight transmission of 75 %.
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
