JDSU solid-state laser can be used for fiber optic sensors, coherent communications, remote antenna connections, optical heterodyne techniques, lidar, sonar and passive oscillators.
Lasers
Filters
Laser type
- Diode lasers - Solid-state lasers
Wavelength (nm)
Wavelength (nm)
1
The highest power system with thermoelectric temperature stabilization for even better signal-to-noise ratios and DB-connector for monitoring/modulation.
The Q-Switched Series breakthrough technology enables optimum performance with the lowest power consumption available.
The CNI series cw diode lasers are available with nearly all commercial available wavelengths.
Innovative Photonic Solutions’ single-mode wavelength stabilized lasers feature high output power with ultra-narrow spectral bandwidth and a diffraction limited output beam. Designed to replace expensive DFB, DBR, fiber, and external cavity lasers.
Compact diode laser modules without compromises for industrial integration and scientific applications.
The SWS diode laser integration modules consist of diode laser, fiber delivery and galvanometer scanning head. The modules are available in 300 W and 500 W laser power.
The DIADEM lasers are very compact, high-energy, ultrafast lasers for demanding applications in micro material processing and optogenetics.
The SIRIUS series lasers produce high energy at ps pulses in a compact and rugged format.
The ALTAIR series ultrafast lasers produce high average power at ultra short pulses in a compact and robust format.
The ANTARES series picosecond lasers deliver high average power with picosecond pulses and high repetition rates in a compact and rugged format.
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
