CNI-DPSS-CW-Laser
DPSS Lasers Economy
The cw solid-state lasers of the CNI series are characterized by the availability of almost all commercially available wavelengths
Lasers
Filters
Laser type
- Diode lasers - Solid-state lasers
Wavelength (nm)
Wavelength (nm)
1
Lasers
The illumination spectrum of lasers is usually narrower band than conventional light sources resulting in a very coherent light beam. Laser 2000 offers an extensive selection of lasers and other specialized coherent light sources.
Lasers are selected based on wavelength, power, pulsed or cw operation, and other criteria.
OPO-Radiant
Opotek Radiant - OPO Lasersystem
Optical parametric oscillator with integrated pump laser and very wide wavelength range 210 nm - 2500 nm. A complete system with highest stability and easy operation for fast results.
The high power system with thermoelectric temperature stabilization for even better signal-to-noise ratios and DB-connector for monitoring/modulation.
CNI-HighPower-Fiber-Diode
High Power Fiber Coupled Diode Lasers
Fiber-coupled diode laser with high performance and current and temperature control in a compact housing
JDP-DPSS-CW
JDSU Solid-State CW lasers
These DPSS lasers have very low noise and excellent beam quality. They have been designed for easy integration.
JDP-IDL-series
JDSU Direct-Diode laser
JDSU direct-diode laser products provide up to 180 watts output at 940 nm with 600 µm fiber delivery
JDP-DPSS-Pulsed-Q-Series
JDSU Solid-State Pulsed laser
The JDSU Q Series lasers are Q-switched diode-pumped UV and green lasers which are used for high-pulse-energy processing of materials such as ceramics, high-repetition-rate processing of materials such as sapphire or silicon.
JDP-NPRO-series
JDSU NPRO Single Frequency Laser
JDSU solid-state laser can be used for fiber optic sensors, coherent communications, remote antenna connections, optical heterodyne techniques, lidar, sonar and passive oscillators.
The highest power system with thermoelectric temperature stabilization for even better signal-to-noise ratios and DB-connector for monitoring/modulation.
CRL-DPSS-UV-IR-pulsed
Pulsed DPSS Lasers
The Q-Switched Series breakthrough technology enables optimum performance with the lowest power consumption available.
CNI-Diode-Laser
Diode Lasers Economy
The CNI series cw diode lasers are available with nearly all commercial available wavelengths.
IPS-L2K-Series
Narrow Linewidth Stabilized Diode Lasers
Innovative Photonic Solutions’ single-mode wavelength stabilized lasers feature high output power with ultra-narrow spectral bandwidth and a diffraction limited output beam. Designed to replace expensive DFB, DBR, fiber, and external cavity lasers.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
