OEM Fiberlaser Integration Module

OEM Fiberlaser Integration Module
  • OEM Fiberlaser Integration Module

Reference number: SWS-DLR

The SWS diode laser integration modules consist of diode laser, fiber delivery and galvanometer scanning head. The modules are available in 300 W and 500 W laser power.


Need more info?
Contact our expert.

Laser & Light Sources Team
Phone: +49 8153 405-11



OEM Diode Lasers for Integration

Diode lasers consist of a laser diode only, which is usually combined with collimation and focusing optics. These lasers are available with laser powers from a few watts up to the kW range, both as single-transmitter or multi-transmitter diode lasers and are available as single- or multimode lasers. For cooling the diodes are mostly mounted on a heat sink.

Diode lasers are characterized by a very compact design and achieve comparatively high efficiencies of up to 50%. Long maintenance intervals and lifetimes up to 30,000 hours are even convincingly advantages.

Consequently, many applications of high-performance diode lasers use these advantages in medical technology and many applications in the wide field of laser material processing.

The DLS integrations kits are designed for standalone machines, laser replacement and for robot systems. The DLS lasers are the right choice for 24/7 applications because for their high reliability and low operation costs in any operation environment.

Module Type DLR -300 DLR-400
Central wavelength in nm 980+/-3 980+/-3
Power in W 300 400
Modulation frequency in kHz 1 - 50 1 - 50
Fiber diameter in µm 2 40
Fiber connector Collimator or QBH dto.
Fiber length in m 5 dto.
Pilot Laser Power in mW 1 dto.
Pilot fiber wavelength in nm 630 -680 dto.
Cooling air dto.
Environmental conditions 10 – 40 °C, 10 – 95% humidity not condensing
Electrical parameters
Voltage in V 240 VAC, one phase plus (N) dto.
Frequency in Hz 50 dto.
Power consumption in W 1.000 … 1400 dto.
Efficiency in % about 45 dto.
Mechanical parameters
Width, length, height in mm 585 x 484 x 178 dto.
Rack definition 19" /4 HU dto.
Cooling air dto.

Scanner control and software

Option 1   -     DL-20-EP-SC Laser- und Scanner Control internally in 19“ rack 4HU via Scaps USC1/USC2 SAM Light
Option 2   -     SCR-300-SC Laser- und Scanner Control separatelly in 19“ rack 2HU via Scaps USC1/USC2 SAM Light
Option 3   -     SCR-300-SL Laser- und Scanner Control separatelly in 19“ rack 2HU via Scanlab RTC5 Laserdesk
Option 4   -     SCR-300-RL Laser- und Scanner Control separatelly in 19“ rack 2HU via Raylase SPICE Pro Weldmark