Laser protection glasses according to DIN EN 207 with polycarbonate filter and a daylight transmission of 20 %.
Laser Safety Goggles
Filters
Test standard
Test standard
Filter Material
- Polycarbonate
Filter Material
1
UNV-P1044-5X7
copy of Laser Safety Goggle, 190-535 nm, 765-1100 nm
Laser protection glasses according to DIN EN 207 with polycarbonate filter and a daylight transmission of 15 %.
PRS-Weld-Helmet
Laser welding helmet MAXIMUS
Laser safety helmet for hand-held lasers and all welding applications with permanent laser protection and switchable automatic glare protection (ADF).
NIR-Weld-View-7-ND1
Laser safety goggle for laser welding
Laser protection goggle for laser welding according to DIN EN 207 with additional flip filter.
PRS-Weld-Helmet-Light
Laser welding helmet MAXIMUS TROOPER
Laser safety helmet for hand-held lasers and all welding applications with permanent laser protection and switchable automatic glare protection (ADF).
LMT-ALF-passive
Passive ALF Interlocked Laser Welding Helmet
Interlocked Laser Safety Helmet for Hand-held Laser Welding. Designed specifically to protect welders from stray laser radiation, the interlocked helmet design requires the helmet to be properly worn with the visor closed before firing the laser.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
