UNV-G2001-616
Patients Goggle 645-1525/2800-3300/10600 nm
Laser safety goggles for patients according to DIN EN 207 with glass filter and a daylight transmission of 27 %.
Laser Safety Goggles
Filters
Test standard
- Adjust protection (EN 208) - Full protection (EN 207)
Test standard
Filter Material
Filter Material
1
NIR-AL3-xxx
Laser adjustment goggle 488-540 nm, up to 1 W
Laser adjustment goggles according to DIN EN 208 with polycarbonate filter and a daylight transmission of 19 %.
NIR-RA3-xxx
Laser adjustment goggle 632-660 nm, up to 1 W
Laserjustierbrillen according to DIN EN 208 with polycarbonate filter and a daylight transmission of 32 %.
NIR-ZSY-xxx
Laser adjustment goggle 532 nm, up to 100 mW
Laser adjustment goggles according to DIN EN 208 with polycarbonate filter and a daylight transmission of 15 %.
Laser safety goggles according to DIN EN 207 with glass filter and a daylight transmission of 30 %.
NIR-CYN-xxx
Laser Eyewear, 730-1085 nm
Laser safety goggles according to DIN EN 207 with polycarbonate filter and a daylight transmission of 36 %.
NIR-TRI-xxx
Laser Eyewear, 180-534/750-1080 nm
Laser safety goggles according to DIN EN 207 with polycarbonate filter and a daylight transmission of 26 %.
NIR-YLW-xxx
Laser Eyewear, 190-460 nm
Laser goggles with polycarbonate filter and a daylight transmission of 73 %.
NIR-YPL-xxx
Laser Eyewear, 560-1500 nm
Laser safety goggles according to DIN EN 207 with polycarbonate filter and a daylight transmission of 7 %.
NIR-ML1-xxx
Laser Eyewear, 765-1085 nm
Laser safety goggles according to DIN EN 207 with polycarbonate filter and a daylight transmission of 45 %.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
