UNV-P1020-xxx
Laser Safey Goggle, 560-600 nm
Laser safety goggles according to DIN EN 207 with polycarbonate filter and a daylight transmission of 12 %.
Laser Safety Goggles
Filters
Test standard
Test standard
Filter Material
- Polycarbonate - Stainless steel
Filter Material
1
UNV-P1025-xxx
Laser adjustment goggle, 528-534 nm up to 100 mW
Laser adjustment goggles according to DIN EN 208 with polycarbonate filter and a daylight transmission of 45 %.
NIR-ARG-xxx
Laser safety goggle, 180-532 nm
Laser safety goggles according to DIN EN 207 with polycarbonate filter and a daylight transmission of 48 %.
NIR-DI4-xxx
Laser Eyewear, 625-850 nm
Laser adjustment goggles according to DIN EN 208 with polycarbonate filter and a daylight transmission of 12 %.
UNV-P1018-xxx
Laser adjustment goggle, 592-695 nm up to 10 mW
Laser safety goggles according to DIN EN 207 with polycarbonate filter and a daylight transmission of 32 %.
UNV-P1001-xxx
Laser safety goggle, polycarbonate 10600 nm - DI LB4
Laser safety goggles according to DIN EN 207 with polycarbonate filter and a daylight transmission of 90 %.
UNV-P1022-xxx
Laser Safety Goggle, 630-1150 nm
Laser safety goggles according to DIN EN 207 with polycarbonate filter and a daylight transmission of 10 %.
NIR-Patientenbrille
Patient Eyewear
A fully adjustable stainless steel patient eyewear for close-to-the-eye aesthetic applications with a 0 % daylight transmission.
UNV-P1026-xxx
Laser Safety goggle, 680-790 nm
Laser safety goggles according to DIN EN 207 with polycarbonate filter and a daylight transmission of 10 %.
Laser safety goggles according to DIN EN 208 with polycarbonate filter and a daylight transmission of 38 %.
NIR-AL3-xxx
Laser adjustment goggle 488-540 nm, up to 1 W
Laser adjustment goggles according to DIN EN 208 with polycarbonate filter and a daylight transmission of 19 %.
NIR-RA3-xxx
Laser adjustment goggle 632-660 nm, up to 1 W
Laserjustierbrillen according to DIN EN 208 with polycarbonate filter and a daylight transmission of 32 %.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
