BWT-SCL101
Spectral Calibration Light Source
B&W Tek fiber optic calibration light sources for wavelength calibration are available in 6 lamp models. Argon, Krypton, Mercury, Mercury/Argon, Neon and Xenon with excellent stability.
Laser & Light Sources
BWT-BPS2.0
20W Constant Current Tungsten Light Source
20W Constant Current Tungsten Light Source with Replaceable Bulb from B&W Tek with stable performance
CNI-XXX
DPSS Lasers Economy
The cw solid-state lasers of the CNI series are characterized by the availability of almost all commercially available wavelengths
LSO-Pump-Cavities
Pump Cavities
Pump cavities focus the radiation of the pump lamp into the laser rod, thus optimizing pump efficiency.
JDP-kW-Fiber-Laser
Fiber Laser
Lumentum CORELIGHT fiber laser and engines offer outstanding performance for demanding macromaterial processing applications.
LSO-Pumpkammern
Pump chambers / laser heads
Complete pumping chambers and laser heads can be offered for a variety of lamp-pumped and diode-pumped laser systems.
LSO-Laserkristalle
Lasercrystal / Laser Rods
To optimize the beam quality and maximise the output power of a laser, the correct laser medium and dopant level needs to be selected.
LSO-Flow Tubes
Flow Tubes / Flow Plates
Flow Tubes and Flow Plates aFlow Tubes and Flow Plates are used to cool the laser rod and the pump lamp.
The SWS fiber laser integration modules consist of fiber laser, fiber delivery and galvanometer scanning head. For a wide range of applications the modules are available from 20 W to 100 W
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
