The ALCOR series ultrafast lasers produce high average power with ultrashort femtosecond pulses at 920 nm or 1064 nm.
1
Lightsources
Below you will find a pre-selection of suitable light sources for fluorescence microscopy, such as laser modules or LED modules with single or combined wavelengths. For multiphoton microscopy you will find high-power femtosecond lasers. To see our complete product range, please go to Laser & Light Sources. We are also happy to advise you and help you find the right product for your application.
FYL-Iceblink
FYLA Supercontinuum picosecond laser
The FYLA Supercontinuum picosecond laser provides an average power of 3 W over a broad wavelength range of 450 - 2300 nm with a pulse duration of < 10 ps.
CNI-DPSS-CW-Laser
DPSS Lasers Economy
The cw solid-state lasers of the CNI series are characterized by the availability of almost all commercially available wavelengths
CNI-HighPower-Fiber-Diode
High Power Fiber Coupled Diode Lasers
Fiber-coupled diode laser with high performance and current and temperature control in a compact housing
CNI-Diode-Laser
Diode Lasers Economy
The CNI series cw diode lasers are available with nearly all commercial available wavelengths.
The DIADEM lasers are very compact, high-energy, ultrafast lasers for demanding applications in micro material processing and optogenetics.
SLP-1000 ON-CHIP SUPERCONTINUUM LASER
The SLP-1000 is the industry’s first portable and maintenance-free wideband laser. Its smooth, wide and coherent spectral output offers an unrivalled light source.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
