The TIA-2000 Optical to Electrical Converter is a high speed photodetector module designed for direct optical-to-electrical conversion of RF-modulated optical signals and provides a typical bandwidth of DC-20 GHz
Lab and production measurement technology
1
The TIA-4000 is comprised of a fiber coupled InGaAs APD detector combined with a variable reverse bias voltage network and fast transimpedance amplifier
The SMX-Manta Microscope is used for MPO/MTP and Singel Fiber connectors for field and lab applications
The SMX Manta-W+ Microscope is used for MPO/MTP and Singel Fiber connectors for field and lab applications
GPCs' Polarization Scrambler uses a breakthrough all-fiber technology to effectively randomize polarization states. Depolarizing by polarization scrambling has many important applications.
Mit der PPMD Quelle -1000 ist es erstmals möglich, deterministisch und mit hoher Auflösung PMD-Werte erster Ordnung bis 180 ps und zweiter Ordnung bis 8100 ps2 zu erzeugen.
The Distributed Polarisation Crosstalk Analyser from General Photonics is a white light interferometer that allows spatially resolved information to be obtained on the mechanical stress of a PM fiber.
The POD-201 is an FPGA powered polarimeter specially designed for high-speed polarization analysis and monitoring. The instrument uses four channels to simultaneously obtain the four Stokes parameters and measure the instantaneous state of polarization (SOP) and degree of polarization (DOP) of an input light beam.
The PDL multimeter PolaChex simultaneously measures the Polarization Dependent Loss
(PDL), Insertion Loss (IL), and optical power of a device under test (DUT) in just 30 ms.
The ERM-202 is a dual channel polarization extinction ratio (PER) meter specifically designed to simultaneously measure the PER and power ratio of a device with two polarization maintaining (PM) outputs, such as a Y-branch fiber gyro IOC, PM coupler (PMC), or polarization beam splitter (PBS), as well as evaluate the performance (output DOP) of depolarizers.
The OCA-1000 is a multi-channel optical component analyzer capable of performing simultaneous insertion loss (IL), polarization dependent loss (PDL), and optical power (P) measurements on multiple optical paths.
The DOP-201 measures and displays the Degree of Polarization (DOP) of a light source in real time with high accuracy and wide dynamic range.
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
