DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The quality of the radiation is often referred to in material processing and measurement technology. Depending on the application, the quality is determined by the temporal and local stability of the output power, the width of the frequency spectrum, the temporal and local coherence, and the magnitude of the beam divergence, which is related to the extent to which the radiation can be focused.
DAT-WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
DAT-BladeCam2-(X)HR
The beam profiling cameras BladeCam2-HR and BladeCam2-XHR combine an extremely compact design (housing depth of only 12.84 mm) with a very high resolution.
DAT-WinCamD-IRBB-CO2
DAT-BR2-xxx
DAT-TaperCamD-LCM
DAT-BMS2-xxx
Based on the patented multi plane scanning technology the scanning system the BeamMap allows the measurement of focal position, beam diameter (according to ISO 11146), divergence and the M2 factor of different focussed cw or qcw laser beams in real time.
DAT-WinCamD-THz
DAT-WinCamD-QD-2000
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 350 - 2000 nm with resolutions up to 1920 x 1080 pixel.
DAT-WinCamD-GCM
This laser beam profiler has a CMOS sensor that guarantees frame rates of up to 60 Hz at high dynamic range and is suitable for large beam diameters up to 11.3 mm. The GCM version works with a GigE connection and is therefore ideal for installation in industrial systems.
DAT-WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.