Mutlispectral THz Camera
Reference number: DAT-WinCamD-THz
Laser Beam Profiler, which is ideally suited for multispectral THz laser beam analysis in the range of 3 THz to 20 THz.
Reference number: DAT-WinCamD-THz
Laser Beam Profiler, which is ideally suited for multispectral THz laser beam analysis in the range of 3 THz to 20 THz.
Need more info?
Contact our expert.
Optical Test & Measurement Team
Phone: +49 8153 405-11
Description
With large active area, high spatial resolution, global shutter, and fast frame rate, the port-powered WinCamD™-THz is ideally suited to multispectral THz laser beam profiling.
The slim compact package with flexible USB 3.0 cable easily inserts into tight optical trains. Unlike bolometric & pyroelectric alternatives, the mutlispectral THz camera is insensitive to background thermal noise.
Switchable software configurations allow the user to move swiftly between multi-spectral alignment mode and a mode which compensates for the non-linear response to THz beams. Shutter trigger options simplify single or multi-shot pulse capture. The mutlispectral THz camera is paired with DataRay’s full-featured software which has no license fees, unlimited installations, comprehensive interfacing options and free software updates.
Pixel size, H x V & Count: |
5.5 x 5.5 μm pixels, 2048 x 2048, 4.2 MPixel |
Sensor image area: |
11.3 x 11.3 mm |
Shutter type: |
Global |
Frame rate: |
≥60 Hz @ 512 x 512; ≥30 Hz @ 1024 x 1024; ≥12 Hz @ 2048 x 2048 |
Max. ‘every pulse’ PRR: |
≥12.5 Hz |
Single pulse capture max PRR: |
USB 3.0: 12.6 kHz; USB 2.0: 6.3 kHz |
Signal to RMS Noise: |
>500:1 |
Electronic Shutter: |
25,000:1, 85 μs to 2s on USB 3.0; 12,500:1 158 μs to 2s on USB 2.0 |
ADC: |
12 bit |
Interface: |
USB 3.0/2.0 Port-powered |
Downloads