NIR-AG3-xxx
Laser adjustment goggle 532 nm, up to 1 W
Laserjustierbrillen according to DIN EN 208 with polycarbonate filter and a daylight transmission of 47%.
NIR-AG3-xxx
Laserjustierbrillen according to DIN EN 208 with polycarbonate filter and a daylight transmission of 47%.
NIR-RB3-xxx
Laser safety goggles according to EN 207 with a polycarbonate filter and a daylight transmittance of 56 %.
UNV-P1005-xxx
Laser safety goggles according to EN 207 and laser adjustment goggles according to EN 208 with polycarbonate filter and a daylight transmission of 33 %.
NIR-ABL-xxx
Laser adjustment goggles according to DIN EN 208 with polycarbonate filter and a daylight transmission of 77 %.
NIR-DYG-xxx
Laser safety goggles according to EN 207 with a polycarbonate filter and a daylight transmittance of 15 %.
NIR-ZS1-xxx
Laser safety goggles according to EN 207 with a polycarbonate filter and a daylight transmittance of 34 %.
NIR-RB2-xxx
Laser safety goggles according to EN 207 with a polycarbonate filter and a daylight transmittance of 35 %.
Laserjustierbrillen according to DIN EN 208 with polycarbonate filter and a daylight transmission of 29 %.
NIR-DIW-xxx
Laser safety goggles according to EN 207 with a polycarbonate filter and a daylight transmittance of 15 %.
Laser protection glasses according to DIN EN 208 with polycarbonate filter and a daylight transmission of 10 %.
UNV-G2012-559G
Laser safety goggles according to DIN EN 207 with glass filter and a daylight transmission of 92 %.
NIR-YAD-xxx
Laser safety goggles according to DIN EN 207 with polycarbonate filter and a daylight transmission of 11 %.
DAT-WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.