JDP-IDL-series
JDSU Direct-Diode laser
JDSU direct-diode laser products provide up to 180 watts output at 940 nm with 600 µm fiber delivery
Laser Welding
1
Laser Welding
JDP-kW-Fiber-Laser
Fiber Laser
Lumentum CORELIGHT fiber laser and engines offer outstanding performance for demanding macromaterial processing applications.
The SWS CO2 laser integration modules consist of CO2 laser source and galvanometer scanning head. For a wide range of applications the modules are available from 20 W to 400 W.
The SWS diode laser integration modules consist of diode laser, fiber delivery and galvanometer scanning head. The modules are available in 300 W and 500 W laser power.
The SWS fiber laser integration modules consist of fiber laser, fiber delivery and galvanometer scanning head. For a wide range of applications the modules are available from 20 W to 100 W
LMT-Weld-Curtain-Light
Laser Safety Curtain Light for Laser Welding
The laser safety curtain Weld-Curtain-Light is suitable as cost-effective protection against weak scattered laser radiation from a laser welding process.
NIR-Weld-View-7
Laser safety goggle for laser welding
Laser protection glasses for laser welding according to DIN EN 207.
LMT-Weld-Screen
Mobile Laser Safety Screen for Laser Welding
Mobile laser protection wall in lightweight construction for flexible, temporary delimitation of a laser welding area.
LMT-Weld-Curtain
Laser Safety Curtain for Laser Welding
Laser safety curtain for delimiting laser welding areas.
STC-Weld-Cabin
Customized Laser Safety Cabin for Laser Welding
Customized laser safety cabin for the complete delimitation of a laser welding area.
LMT-ICS-9
Interlock control system ICS-9
The interlock control system ICS-9 reaches the highest possible performance level "PL e" when properly installed in accordance with EN ISO 13849-1.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
