Smart Active Clad Alignment Fusion Splicer W/ A Cloud-Based Operation & Management System
1
Splicing Technology
Handy 3-axis fusion splicer with core centering and cloud-based operation and management system. The View5 Pro has the approval for Telekom ZTV TK-Netze 48
Handy 3-axis fusion splicer with core centering and cloud-based operation and management system. The View5 Pro has the approval for Telekom ZTV TK-Netze 48
The high precision Cleaver V7+ cuts optical fiber very precisely, can be used for a variety of holders for up to twelve ribbon fibers as well as universal holders for 250um, 900um and 3.0mm fibers and flat cables.
Containers for fiber residues - Especially from the point of view of occupational health and safety a careful handling of fiber remains is recommended
FO 103 -T- 250 -J - “Tri-Hole” Fiber Optic Stripper
stripping 250 micron buffer coating from 125 micron optical fiber
TS Pro is a universal and thermal fiber stripper that can remove the coating and sheathing of all types and brands of fibers.
Splice protection press for crimp splice protection
The crimp splice protection serves to protect the splice against climatic and mechanical stresses. The protection is processed with the splice protection press.
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
