These DPSS lasers have very low noise and excellent beam quality. They have been designed for easy integration.
Lasers
Filters
Laser type
- Gas lasers - Solid-state lasers
Wavelength (nm)
Wavelength (nm)
1
The JDSU Q Series lasers are Q-switched diode-pumped UV and green lasers which are used for high-pulse-energy processing of materials such as ceramics, high-repetition-rate processing of materials such as sapphire or silicon.
JDSU solid-state laser can be used for fiber optic sensors, coherent communications, remote antenna connections, optical heterodyne techniques, lidar, sonar and passive oscillators.
The Q-Switched Series breakthrough technology enables optimum performance with the lowest power consumption available.
Compact diode laser modules without compromises for industrial integration and scientific applications.
The SWS CO2 laser integration modules consist of CO2 laser source and galvanometer scanning head. For a wide range of applications the modules are available from 20 W to 400 W.
The DIADEM lasers are very compact, high-energy, ultrafast lasers for demanding applications in micro material processing and optogenetics.
The SIRIUS series lasers produce high energy at ps pulses in a compact and rugged format.
The ALTAIR series ultrafast lasers produce high average power at ultra short pulses in a compact and robust format.
The ANTARES series picosecond lasers deliver high average power with picosecond pulses and high repetition rates in a compact and rugged format.
The ALCOR series ultrafast lasers produce high average power with ultrashort femtosecond pulses at 920 nm or 1064 nm.
The LaserBoxx HPE series is a high power laser diode module offering excellent performance and reliability in a compact driver integrated laser head
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
