GPC-POS-002
Filters
Fiber
Fiber
Type
- Lighting - PM Components
1
Polarization components
The PolaStay polarization tracker automatically adjusts the state of polarization (SOP) towards a reference SOP, counteracting continuous input SOP variations as fast as 0.9 ms with no resets.
GPC's Scrambler module uses a breakthrough all- fiber technology to effectively randomize polarization states. This module is designed to be easily plugged into sensor equipment or measurement instruments with minimal development effort.
GPC-PCD-003
Polarization Scrambler Module
GPCs' 4-axis Polarization Scrambler Module uses a breakthrough all-fiber technology to effectively randomize polarization states. Depolarizing by polarization scrambling has many important applications:
GPC-PSM-002
Miniature Polarization Scrambler Module
GPCs' miniature polarization scrambler module, the PSM-002, is specially designed for integration into sensor and communication systems that need to work in extreme environmental conditions.
GPC-PSM-003-C
Micro Polarization Controller
This OEM micro polarization controller integrates GPCs all-fiber dynamic polarization control technology with miniature electronic drive/control circuitry into a compact, self-contained device that provides full polarization control functionality while minimizing volume, power consumption, and cost.
GPC-PSM-003-S
Micro Polarization Scrambler
This OEM micro polarization scrambler integrates GPCs all-fiber dynamic polarization control technology with miniature electronic drive/control circuitry into a compact, self-contained device that provides full polarization control functionality while minimizing volume, power consumption, and cost.
GPC-POD-xx
High Speed In-line Polarimeter - PolaDetect
GPCs' in-line polarimeter is specially designed for low cost, high-speed polarization characterization without interrupting data traffic. It outputs four voltage signals for calculating both the degree of polarization (DOP) and the state of polarization (SOP) of the light passing through the device in microseconds.
GPCs' high-speed polarization state generator (PSG) module provides the ability to generate 6 states of polarization (-45°, 0°, 45°, 90°, RHC & LHC) across the Poincaré Sphere in less than 250 ?s, with an impressive repeatability of less than 0.1 degrees.
This module integrates a General Photonics all-fiber dynamic polarization controller with miniature piezo driver card, so that the SOP of the signal can be directly controlled either by a 0-5V analog control signal or a 12-bit TTL digital control signal. Because there is an on-board HV DC/DC converter, no external high voltage power supply is required.
GPC-MPC-3/4X
Mini Dynamic Polarization Controller - PolaRITE III
The PolaRITE III is a low profile polarization controller for system integration with significantly reduced height and size.
GPC-PSW-002
Polarization Switch - PolaSwitch
GPCs alle Festkörperpolarisationsschalter können die SOP des einfallenden Lichts schnell und wiederholbar um einen festen Winkel, entweder 45 oder 90 Grad, drehen. Sowohl Single-Mode- als auch PM-Faser-Pigtailed-Versionen sind verfügbar.
GPC-PLC-003/006
Drop-in Polarization Controller - PolaRITE
This is the in-line version of the PolaRITE polarization controller. It can be inserted into a fiber optic system to control the polarization state of light without having to disconnect any part of the system.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.